Kyocera TASKalfa 650c

8 OPTION SETUPS
314 Setting up IP Security Function
 Flushing out IPsec sessions
If the keys for IPsec communication are leaked out or any security violation occurs, you can manually delete (flush) the
current session with a flush connection function and start a new session. When you want to delete the information of SAD
(Security Association Database) for any reason, you can do it in the same way.
Flushing out IPsec sessions
1
Access the COMMAND CENTER administrator mode.
 P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click [Setup], and then [Network].
 P.107 “Setting up Network settings”
3
Click a link on the [Network] submenu or scroll down the menu and click [Flush
Connections].
The confirmation dialog box appears.
4
Click [OK].
The IPsec session is flushed out. The confirmation dialog box appears after you flush out the session. Click [OK].