Kyocera TASKalfa 650c

7 COMMAND CENTER ADMINISTRATOR MODE
228 Registering From COMMAND CENTER
 Resetting the public template
You can reset a public template that you have registered.
You can reset a public template that you selected, or you can reset all public templates that are registered in the Public
Template Group.
 P.228 “Resetting a public template”
 P.230 “Resetting all public templates”
Resetting a public template
To reset an unnecessary public template, perform the following procedure.
Resetting a public template
1
Access COMMAND CENTER in the administrator mode.
 P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Registration] menu and [Public Template] submenu.
The Public Template submenu page is displayed.
3
From the templates list, click the template icon that you want to reset.
 If the templates list is displayed in the List view, click the template name that you want to reset.
 The Template Properties page is displayed.
 You can change the template list view by clicking on either [Panel View] or [List View].
 If you know which public template you want to reset, click the number of the public template in the [Jump to]
links.