7.COMMAND CENTER ADMINISTRATOR MODE
Maintenance From COMMAND CENTER 221
7 COMMAND CENTER ADMINISTRATOR MODE
Rebooting the equipment
An administrator can reboot the equipment.
Rebooting the equipment cannot be performed when there are jobs in progress.
Rebooting the equipment
1
Access COMMAND CENTER in the administrator mode.
P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Maintenance] menu and [Reboot] submenu.
The Reboot submenu page is displayed.
3
Click [Reboot] to reboot the equipment.
The confirmation dialog box appears.
4
Click [OK].
The equipment is restarted.
While the equipment is being restarted, the network will not be available. COMMAND CENTER will display
“Please restart after waiting a few minutes.”. The touch panel will display “NETWORK INITIALIZING”. When
this “NETWORK INITIALIZING” message disappears, COMMAND CENTER will once again be available.
To Next Page
Loading...
