Kyocera TASKalfa 650c

7 COMMAND CENTER ADMINISTRATOR MODE
170 Setting up From COMMAND CENTER
6) Password
Enter the password to access an SMB server, FTP server, or NetWare file server, if required. The space can be
entered.
7) Retype Password
Enter the same password again for a confirmation.
 Setting up Email settings
In the [Email] submenu in the [Setup] menu, an administrator can configure the Email settings that are needed for Scan to
Email operations.
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.
Setting the Email settings
1
Access COMMAND CENTER in the administrator mode.
 P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Setup] menu and [Email] submenu.
The Email submenu page is displayed.
3
In the Email submenu page, set the Email settings as required.
To set the Email settings, see the following:
 P.171 “Setting up Email Setting”