Kyocera TASKalfa 650c

7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 173
7 COMMAND CENTER ADMINISTRATOR MODE
 Setting up InternetFax settings
In the [InternetFax] submenu in the [Setup] menu, an administrator can configure the Internet Fax settings needed for
Internet Fax transmissions.
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.
Setting the InternetFax settings
1
Access COMMAND CENTER in the administrator mode.
 P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Setup] menu and [InternetFax] submenu.
The InternetFax submenu page is displayed.
3
In the InternetFax submenu page, set the Internet Fax settings as required.
To set the InternetFax Setting, see the following:
 P.174 “Setting up InternetFax Setting”
4
Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel]. Clicking [Cancel] cannot
restore the defaults. This can only clear the changes and restore the current settings before saving the
changes.