9 APPENDIX
316 Installing Certificates for a Client PC
Installing Certificates for a Client PC
Configuring the Microsoft Management Console
The following describes a configuration on Windows Vista. The procedure is the same when Windows XP or Windows
2000 is used.
1
Open the command prompt, type “mmc” and press the Enter key.
2
From the [File] or [Console] menu of the window that appears, select [Add/Remove
Snap-in]
The Add or Remove Snap-ins dialog box appears.
3
From the list of [Available snap-ins:], select [Certificates] and click [Add].
For Windows XP/2000, click [Add] to display the list and then select [Certificates.]
The [Certificates snap-in] dialog box appears.
4
Select [Computer account] and click [Next].
The [Select Computer] dialog box appears.
To Next Page
Loading...
