7 COMMAND CENTER ADMINISTRATOR MODE
202 Maintenance From COMMAND CENTER
6
Select the check box of data that you uploaded a backup file and click [Restore].
The restore process begins. This procedure may take several minutes.
Deleting the data from local folder
An administrator can delete information such as scanned data, transmission data, and reception data that are stored in the
local folder using the Save as file function. It is recommended to delete the stored data periodically to maintain the hard
disk.
Deleting data
1
Access COMMAND CENTER in the administrator mode.
P.100 “Accessing COMMAND CENTER Administrator Mode”
2
Click the [Maintenance] menu and [Delete Files] submenu.
The Delete Files submenu page is displayed.
3
Select the check box of data that you want to delete and click [Delete Files].
Scan — The data in the “SCAN” folder within the “FILE_SHARE” folder of this equipment, that are stored by Scan
to File operations, will be deleted.
Transmission — The data in the “TXFAX” folder within the “FILE_SHARE” folder of this equipment, that are stored
by Fax to File operations, will be deleted.
Reception — The data in the “RXFAX” folder within the “FILE_SHARE” folder of this equipment, that are stored by
Save as file mailbox and Save as file Fax Received Forward or Internet Fax Received Forward.
To Next Page
Loading...
