7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 159
7 COMMAND CENTER ADMINISTRATOR MODE
3
In the Fax submenu page, set the fax settings as required.
To set the Fax Settings, see the following:
P.160 “Setting up Fax Setting”
4
Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel]. Clicking [Cancel] cannot
restore the defaults. This can only clear the changes and restore the current settings before saving the
changes.
5
Click [OK] to apply the changes.
When using Internet Explorer, the changes may not be reflected on the Fax page immediately after changing the
settings and clicking [Save]. If that happens, click the [Fax] submenu to refresh the page.
To Next Page
Loading...
