7.COMMAND CENTER ADMINISTRATOR MODE
Setting up From COMMAND CENTER 187
7 COMMAND CENTER ADMINISTRATOR MODE
5
Click [OK] to apply the changes.
When using Internet Explorer, the changes may not be reflected on the ICC Profile page immediately after changing
the settings and clicking [Save]. If that happens, click the [ICC Profile] submenu to refresh the page.
Setting up RGB Source Profile
Select an input profile to be used for RGB color space conversion when you print RGB data.
1) Default Profile
Select an RGB source profile to be displayed as a default setting of the color profile setting of a printer driver. You can
select among the RGB source profiles already registered in this equipment.
2) [Maintenance]
Click this to perform maintenance of RGB source profiles. The Maintenance RGB Source Profile page is displayed as
you click this. You can import profiles into this equipment, or export or delete the registered profiles. For the details,
see the following:
P.187 “Importing profiles”
P.188 “Exporting profiles”
P.190 “Deleting profiles”
Importing profiles
1
Click [Maintenance] of the desired profile.
The Maintenance Profile page of the selected profile is displayed.
To Next Page
Loading...
