Kyocera TASKalfa 650c

5 REGISTERING FROM COMMAND CENTER
40 Managing Templates
5
Enter the old password in the [Old Password] box, and new password in the New
Password and [Retype Password] boxes.
 You can only use 5-digit numbers for the password.
 You can also enter the administrator password in the [Old Password] box.
 If the password has not been set for the group, leave the [Old Password] box blank.
 Leaving the [New Password] and [Retype Password] box blank releases password protection for the group.
6
Click [Save].
The confirmation dialog box appears.
7
Click [OK].
The group password is set or modified.