Kyocera TASKalfa 650c

5.REGISTERING FROM COMMAND CENTER
Managing Templates 69
5 REGISTERING FROM COMMAND CENTER
5
When the Input Template Password page is displayed, enter the 5-digit password (or
administrator’s password) for the selected private template and click [OK].
The Template Information page is displayed.
6
Click [Change Password] to set the password for the private template.
The Change Template Password page is displayed.
7
Enter the old password in the [Old Password] box, and the new password in the [New
Password] and [Retype Password] boxes.
 You can only use 5-digit numbers for the password.
 You can also enter the administrator password in the [Old Password] box.
 If the password has not been set for the template, leave the [Old Password] box blank.
 Leaving the [New Password] and [Retype Password] box blank releases the password protect for the template.
8
Click [Save].
The confirmation dialog box appears.