SYMPTOM CAUSE REMEDY
Burner does not ignite or
does not function.
Soot build-up on fuel nozzle. Clean or replace fuel nozzle.
Faulty relay inside burner control
box.
Clean or replace relay.
Loose or faulty connectors, hoses
or wires.
Tighten, repair, replace or contact your
authorized dealer.
Burner motor doesn’t
function.
Loose electrical wire(s),
connector(s) or battery problem (if
equipped).
Tighten, repair or replace electrical wires/
connections.
Faulty, non-functioning or
locking brakes.
Improper synchronization.
Ensure wheels, tires and axle are properly
matched.
Brakes under-adjusted. Adjust correctly.
Loose, bent or broken brake
components.
Replace worn or damaged component.
Grease or oil on magnets or linings
(electric brakes).
Clean or replace.
Worn linings or magnets. Replace.
Maintenance
L300 and L600 Tack Distributors5-18
To Next Page
Loading...
