24/40
Basic Operations
Using Fingerprint Authentication Function
Fingerprint Authentication Function
Saving Fingerprints
Performing Fingerprint Authentication
Fingerprint Authentication Function
Hold finger to sensor to authenticate and use handset.
Use this function to unlock screen.
Fingerprint Authentication Function Cautions
Observe the following when using the fingerprint authentication function.
Authentication is based on fingerprint characteristics. This function may be unusable
if your fingerprint characteristics are not prominent.
Ability to authenticate (assuming finger is held to sensor correctly) depends on
conditions of use. Saving your fingerprint may be difficult if finger is in any of the
following conditions. Washing/wiping hands, using different finger, saving a wider
area, etc. may improve capability.
- Wrinkled with moisture (e.g., after a bath)
- Wet with water, sweat, etc.
- Dry
- Covered with handcream, etc.
- Stained with mud or oil
- Rough or damaged (cut, sore, etc.)
- Fingerprint is faint (finger surface is worn)
- Fingerprint is deformed due to weight gain or loss
- Finger surface condition at the time of authentication is extremely different than
when fingerprint was saved
Fingerprint authentication technology does not guarantee successful personal
authentication/verification. SoftBank Corp. is not liable for any damages resulting
from use of handset by third party or lost opportunities to use handset.
To Next Page
Loading...