Lenovo System x3250 M5 - Replacing a Usb Embedded Hypervisor Flash Device

000000
000000
000000
000000
000000
Figure128.USBembeddedhypervisorflashdeviceremoval
Ifyouareinstructedtoreturntheservercomponentoroptionaldevice,followallpackaginginstructions,
anduseanypackagingmaterialsforshippingthataresuppliedtoyou.
ReplacingaUSBembeddedhypervisorflashdevice
UsethisinformationtoreplaceaUSBembeddedhypervisorflashdevice.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage31.
Ifyouarereplacingaservercomponentintheserver,youneedtoslidetheserveroutfromtherack
enclosure,turnofftheserverandperipheraldevices,anddisconnectthepowercordsandallexternalcables.
Toreplaceahypervisorflashdevice,completethefollowingsteps.
Step1.AligntheUSBflashdevicewiththeconnectoronthesystemboardandpushitintotheconnector
untilitisfirmlyseated.
Step2.Slidethelockbarontheflashdeviceconnectortothelockedpositionuntilitisfirmlyseated.
Chapter6.Removingandreplacingservercomponents199