Lenovo System x3250 M5 - Removing a Usb Embedded Hypervisor Flash Device

Whattodonext
1.Installtheserverintotherackenclosureandpushtheserverintotherackuntilitclicksintoplace.
2.Reconnectthepowercordsandanycablesthatyouremoved.
3.Turnontheperipheraldevicesandtheserver.
RemovingaUSBembeddedhypervisorflashdevice
UsethisinformationtoremoveaUSBembeddedhypervisorflashdevice.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage31.
Ifyouarereplacingaservercomponentintheserver,youneedtoslidetheserveroutfromtherack
enclosure,turnofftheserverandperipheraldevices,anddisconnectthepowercordsandallexternalcables.
Toremoveahypervisorflashdevice,completethefollowingsteps.
Step1.Removethecover(see“Removingthecover”onpage157).
Step2.RemovethePCIriser-cardassembly(see“RemovingthePCIriser-cardassembly”onpage163).
Step3.LocatetheUSBembeddedhypervisorflashdeviceconnectoronthesystemboard.
Figure127.LocationoftheUSBembeddedhypervisorflashdeviceconnector
Step4.SlidethelockbarontheflashdeviceconnectortotheunlockedpositionandpulltheUSBflash
deviceoutoftheconnector.
198LenovoSystemx3250M5InstallationandServiceGuide