Lenovo System x3250 M5 - Installing a USB Embedded Hypervisor Flash Device

a.Removetheretainer.
b.Releasetheretentionclipintheopenposition.
c.Alignthecableconnectorwiththeslotontheholder.Placethebatteryorflashpowermodule
intotheholderandmakesurethattheholderengagesthebatteryorflashpowermodule
securely.
000000
000000
000000
000000
000000
Figure63.RAIDadapterbatteryorflashpowermoduleinstallation
Note:Thepositioningoftheremotebatteryorflashpowermoduledependsonthetypeof
theremotebatteriesorflashpowermodulesthatyouinstall.
d.Connecttheotherendofthecabletothecableconnectoronthebatteryorflashpower
module.
e.Lowerandpressdownontheretentionclipuntilitsnapsinplacetoholdthebatteryorflash
powermodulefirmlyinplace.
f.Installtheretainer.
Step8.ReinstallthePCIriser-cardassembly(see“ReplacingthePCIriser-cardassembly”onpage78).
Ifyouhaveotherdevicestoinstall,dosonow.Otherwise,goto“Completingtheinstallation”onpage78.
InstallingaUSBembeddedhypervisorflashdevice
UsethisinformationtoinstallaUSBembeddedhypervisorflashdevice.
Readthesafetyinformationin“Safety”onpagevand“Installationguidelines”onpage31.
70LenovoSystemx3250M5InstallationandServiceGuide