Lenovo System x3250 M5 - Installing an Optional Serveraid SAS;SATA Controller Memory Module

Figure60.ServeRAIDSAS/SATAcontrollersignalcableconnectionforhot-swapharddiskdrivemodels
(leftPCImoduleconnectionwithtwobackplanes)
Step6.Makesuretherelevantcablespassthroughthecableclips.
Step7.AligntheServeRAIDSAS/SATAcontrollersothatthekeysaligncorrectlywiththeconnectoron
thePCIriser-cardassembly.
Step8.InserttheServeRAIDSAS/SATAcontrollerintotheconnectoronthePCIriser-cardassembly
untilitisfirmlyseated.
Attention:IncompleteinsertionmightcausedamagetotheserverortheServeRAIDSAS/SATA
controller.
Step9.InstallthePCIriser-cardassembly(see“ReplacingthePCIriser-cardassembly”onpage78).
Ifyouhaveotherdevicestoinstall,dosonow.Otherwise,goto“Completingtheinstallation”onpage78.
Note:Whenyourestarttheserver,youarepromptedtoimporttheexistingRAIDconfigurationtothe
newServeRAIDSAS/SATAcontroller.
InstallinganoptionalServeRAIDSAS/SATAcontrollermemorymodule
UsethisinformationtoinstallanoptionalServeRAIDSAS/SATAcontrollermemorymodule.
Chapter2.Installingoptionaldevices67