Lenovo System x3250 M5 - Internal Cable Routing and Connectors

Step9.Reconnecttheexternalcablesandpowercords;then,turnontheattacheddevicesandturnon
theserver.
Step10.StarttheSetuputilityandresettheconfiguration.
a.Setthesystemdateandtime.
b.Setthepower-onpassword.
c.Reconfiguretheserver.
See“UsingtheSetuputility”onpage89fordetails.
Step11.EitherupdatetheserverwiththelatestRAIDfirmwareorrestorethepre-existingfirmwarefroma
disketteorCDimage.
Step12.UpdatetheUUID(see“UpdatingtheUniversalUniqueIdentifier(UUID)”onpage102).
Step13.UpdatetheDMI/SMBIOS(see“UpdatingtheDMI/SMBIOSdata”onpage104).
Step14.ReactivateanyFeaturesonDemandfeatures.
Internalcableroutingandconnectors
Thissectionprovidesinformationaboutroutingthecableswhenyouinstallsomecomponentsintheserver.
Formoreinformationabouttherequirementsforcablesandconnectingdevices,seethedocumentation
thatcomeswiththesedevices.
CablingtheDVDdrive
TheinternalroutingandconnectorsfortheDVDdrive.
Notes:
1.Todisconnecttheoptionalopticaldrivecable,youmustfirstpresstheconnectorreleasetab,and
thendisconnectthecablefromtheconnectoronthesystemboard.Donotdisconnectthecableby
usingexcessiveforce.
2.Followtheopticaldrivecableroutingastheillustrationshows.Makesurethatthecableisnotpinched
anddoesnotcoveranyconnectorsorobstructanycomponentsonthesystemboard.
3.Makesuretherelevantcablespassthroughthecableclips.
Chapter6.Removingandreplacingservercomponents259