Figure29.3.5-inchsimple-swapharddiskdrivebackplateassemblies
Toinstallthe3.5-inchsimple-swapharddiskdrivebackplateassembly,completethefollowingsteps:
Step1.Removethecover(see“Removingthecover”onpage33).
Step2.RemovethePCIriser-cardassemblyifapplicable(see“RemovingthePCIriser-cardassembly”on
page163).
Step3.Alignthetabsofthedrivebackplateassemblywiththebackplateassemblyslotsatthebackofthe
backplateassemblycage.
Chapter2.Installingoptionaldevices41
To Next Page
Loading...
