Front view
The front view of the server varies by model. Depending on the model, your server might look slightly
different from the illustrations in this topic.
Refer to the following front view for different server models:
•
“Server models with four 2.5-inch front drive bays” on page 14
• “Server models with eight 2.5-inch front drive bays” on page 15
• “Server models with ten 2.5-inch front drive bays” on page 15
Server model with four 2.5-inch drive bays
Table 3. Components on the front of the server
Callout Callout
1 Drive status LED 2 Drive activity LED
3 Diagnostics panel
4 USB 3.2 Gen 1 (5Gbps) connector
5 External diagnostics connector
6 XClarity Controller USB connector
7 VGA connector (optional) 8 Rack latch (right)
9 Pull-out information tab
10 Drive filler (1)
11 Drive bays (4) 12 Rack latch (left)
Note: For more information about each component, see “Front components overview” on page 16.
14
ThinkSystem SR645 V3 User Guide
To Next Page
Loading...
