Step 1. If the server is installed with the security bezel, remove it first. See “Remove the security bezel” on
page 127
.
Step 2. On each side of the server, remove the two screws that secure the rack latch.
Figure 77. Rack latch screws removal
Step 3. On each side of the server, remove the rack latch from the chassis as shown.
Figure 78. Rack latch removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the rack latches
Use this information to install the rack latches.
About this task
116 ThinkSystem SR645 V3 User Guide
To Next Page
Loading...
