Table 11. System-board-assembly SW5 switch block description (continued)
Switch-bit
number
Switch name
Default position Description
6 SW5–6 MFG mode Off Enables MFG mode of firmware (UEFI/XCC/FPGA)
when changing it to the ON position.
7 SW5–7 At-Scale debug Off Enables BMC At-Scale debug when changing it to the
ON position.
8 SW5–8
Low security
Off Allows transitioning between signed official XCC
builds and XCC test signed builds, and bypasses
CRTM boot check of XCC firmware when changing it
to the ON position.
Chapter 2. Server components 25
To Next Page
Loading...
