About this task
Attention:
• Read
“Installation Guidelines” on page 35 and “Safety inspection checklist” on page 36 to ensure that you
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
CTkyVDu-5Lhy1r9G-4PQGl
.
Procedure
Step 1. Touch the static-protective package that contains the drive to any unpainted surface on the outside
of the server. And then, take the drive out of the package and place it on a static-protective surface.
Step 2. Remove the drive filler from the drive bay and keep the drive filler in a safe place.
Figure 44. Remove a drive filler
70 ThinkSystem SR645 V3 User Guide
To Next Page
Loading...
