Lexmark MX310 Series - Original Size; Copy To Source; Transparency Separators; Separator Sheets

Error code Description Action
325.60 Hardware error—Board ID unknown Go to “Option tray controller card service check” on
page 125.
325.61 Hardware error—Option type unknown
325.62 Hardware error—Product ID unknown
325.63 Hardware error—Sensors are not plugged on the
board.
331.51 Motor 1 (Pick/Lift) motor no first encoder Go to “Option tray pick/lift motor service check” on
page 124.
331.52 Motor 1 (Pick/Lift) motor stop error
331.53 Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
332.54 Motor 2 (Separator/Passthru) Motor no first encoder Go to “Option tray separator/passthrough motor
service check” on page 124.
332.55 Motor 2 (Separator/Passthru) motor stop error
332.56 Motor 2 (Separator/Passthru) PWM underflow
(motor overspeed)
334.57 Motor 3 motor no first encoder Go to “Option tray ACM motor service check” on
page 125.
334.58 Motor 3 motor stop error
334.59 Motor 3 PWM underflow (motor overspeed)
335.60 Hardware error—Board ID unknown Go to “Option tray controller card service check” on
page 125.
335.61 Hardware error—Option type unknown
335.62 Hardware error—Product ID unknown
335.63 Hardware error—Sensors are not plugged on the
board.
341.51 Motor 1 (Pick/Lift) motor no first encoder Go to “Option tray pick/lift motor service check” on
page 124.
341.52 Motor 1 (Pick/Lift) motor stop error
341.53 Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
342.54 Motor 2 (Separator/Passthru) motor no first encoder Go to “Option tray separator/passthrough motor
service check” on page 124.
342.55 Motor 2 (Separator/Passthru) motor stop error
342.56 Motor 2 (Separator/Passthru) PWM underflow
(motor overspeed)
344.57 Motor 3 motor no first encoder Go to “Option tray ACM motor service check” on
page 125.
344.58 Motor 3 motor stop error
344.59 Motor 3 PWM underflow (motor overspeed)
7015
Diagnostic information
123