A
Index sensor removal
1 Remove the left cover. See “Left cover removal” on page 209.
2 Remove the right cover. See “Right cover removal” on page 226.
3 Remove the rear door and cover. See “Rear exit door removal” on page 301 and “Rear cover removal” on page
302.
4 Remove the power supply. See “Power supply removal” on page 272.
5 Remove the power supply shield. See “Power supply shield removal” on page 273.
6 Remove the duplex. See “Duplex removal” on page 274.
7 Disconnect the cable JINDEX1 from the system board.
8 Remove the screw (A).
7015
Repair information
279
To Next Page
Loading...
