Component locations
Exterior locations
Front view
Printer configurations
CAUTION—TIPPING HAZARD: Floor‑mounted configurations require additional furniture for stability. You must
use either a printer stand or printer base if you are using a high‑capacity tray and an input option, or more than
one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need
additional furniture. For more information, see www.lexmark.com/multifunctionprinters.
You can configure your printer by adding an optional 250‑ or 550‑sheet tray.
1
2
3
4
9
10
6
5
8
7
1 Printer control panel
2 Automatic document feeder (ADF)
3 ADF tray
4 ADF bin
7015
Component locations
339
To Next Page
Loading...
