Lexmark MX310 Series - Networking; Preparing to set up the printer on an Ethernet network; Installing the printer on an Ethernet network

General information
The Lexmark
TM
MX310dn, MX410, and MX510 (7015‑xxx) are network‑capable, multi‑function laser printers that print
monochrome print jobs. All information in this service manual pertains to all models unless explicitly noted.
The printers are available in the following models:
Model Configurations Machine type / model
MX310dn Mono laser MFP, Networking/Fax, Duplex print, Simplex
scan
7015‑270
MX410de Mono laser MFP, Networking/Fax, Duplex print/scan,
4.3‑inch color touch screen
7015‑470
MX510de Mono laser MFP, Networking/No fax, Duplex print/scan,
4.3‑inch color touch screen
7015‑630
MX511de Mono laser MFP, Networking/Fax, Duplex print/scan,
e‑Task 4.3‑inch color touch screen
7015‑670
MX511dhe Mono laser MFP, Networking/Fax, Duplex print/scan,
e‑Task 4.3‑inch color touch screen, Hard drive
7015‑675
The diagnostic information in this manual leads you to the correct field replaceable unit (FRU) or part. Use the error
code charts, symptom index, and service checks to determine the symptom and then repair the failure. After you
complete the repair, perform tests as needed to verify the repair.
To begin diagnosing a problem, go to “Diagnostic information” on page 35. See “Repair information” on page 189
for information about removing and reinstalling parts. See “Parts catalog” on page 354 to help identify parts.
Media guidelines
Additional information for printing on specialty media may be found in the Cardstock and Label Guide available at
http://support.lexmark.com.
Paper guidelines
Selecting the correct paper or specialty media reduces printing problems. For the best print quality, try a sample of the
paper or specialty media before buying large quantities.
Paper characteristics
The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating
new paper stock.
7015
General information
25