Lexmark X422 - Page 193

Menus
193
Using the MFP control panel and menus
PCL Emul Settings
Tray
Renumber
To configure your MFP to work with print drivers or applications that use different source
assignments for the paper trays.
Note: Refer to the Technical Reference for more information about assigning source
numbers.
1 Select a print media source. Assign
Tray N
N represents the number of the
tray, either Tray 1 or Tray 2.
Assign MP
Feeder
Assigns the multipurpose feeder.
Assign Man
Paper
Assigns paper to be manually fed
from the multipurpose feeder.
Assign Man
Env
Assigns envelopes to be manually
fed from the multipurpose feeder.
2 Select a value. Off* MFP uses factory default paper
source assignments.
0...199 Select a numeric value to assign a
custom value to a paper source.
None Paper source ignores the Select
Paper Feed command.
Other Tray Renumber selections View Factory
Def
Use the navigation arrow buttons
to display the factory default value
assigned to each paper source.
Restore
Defaults
Select Yes to return all tray
assignments to factory default
values.
Defaults Menu – Print Settings – PCL Emul Menu – PCL Emul Settings
Menu item Purpose Values and descriptions
Point Size To change the point size for
scalable typographic fonts.
1...1008
(in increments of 0.25 points)
Point size refers to the height
of the characters in the font.
One point equals
approximately 1/72 of an inch.
You can select point sizes
from 1 to 1008 in increments
of 0.25 points.
Note: Point Size is only
displayed for typographic
fonts.
12*
Defaults Menu – Print Settings – PCL Emul Menu(continued)
Menu item Purpose Values and descriptions