Lexmark X422 - Page 194

Menus
194
Using the MFP control panel and menus
Pitch To specify the font pitch for
scalable monospaced fonts.
0.08...100
(in increments of 0.01 cpi)
Pitch refers to the number of
fixed-space characters in a
horizontal inch of type. You
can select a pitch from 0.08 to
100 characters per inch (cpi)
in increments of 0.01 cpi. For
nonscalable monospaced
fonts, the pitch is displayed,
but cannot be changed.
Note: Pitch is only displayed
for fixed, or monospaced,
fonts.
10*
Orientation To determine how text and
graphics are oriented on the
page.
Portrait* Prints text and graphics
parallel to the short edge of
the paper.
Landscape Prints text and graphics
parallel to the long edge of the
paper.
Lines per
Page
To determine the number of
lines that print on each page.
1...255 The MFP sets the amount of
space between each line
(vertical line spacing) based
on the Lines per Page, Paper
Size, and Orientation menu
items. Select the correct
Paper Size and Orientation
before changing Lines per
Page.
60*
(country/region-specific
factory default values)
64*
(country/region-specific
factory default values)
A4 Width To select the width of the
logical page for A4 size
paper.
198 mm* Makes the logical page
compatible with the Hewlett-
Packard LaserJet 5 Printer.
203 mm Makes the logical page wide
enough to print eighty 10-pitch
characters.
Auto CR
after LF
To specify whether the MFP
automatically performs a
carriage return after a line
feed control command.
Off* MFP does not perform a
carriage return after a line
feed control command.
On MFP performs a carriage
return after a line feed control
command.
Auto LF
after CR
To specify whether the MFP
automatically performs a line
feed after a carriage return
control command.
Off* MFP does not perform a line
feed after a carriage return
control command.
On MFP performs a line feed after
a carriage return control
command.
Defaults Menu – Print Settings – PCL Emul Menu – PCL Emul Settings(continued)
Menu item Purpose Values and descriptions