4-6 Service Manual
7526
88A0003 Machine M3X0.5-
6G 8L
Printhead 3
88A0095 M2.5x10 Machine 5 V interlock switch actuator assembly 1
24 V interlock switch and shield to rightside frame 1
88A0133 Plastite M3x8 ADF front cover 2
ADF handle cover 2
ADF motor cover 3
ADF upper front cover 1
Cave LED lens 1
Interconnect card to ADF 2
Left cover 3
Main case cover 2
MDC card metal cage 4
MDC card to frame 1
Motor assembly to ADF 2
Right cover 1
88A0212 Taptite M3.5x0.6
PAN
AC inlet ground wire 1
Fuser AC cable's ground wire to leftside plate 1
88A0232 Taptite M3 L6
PANHD
AC inlet cable to frame extension 2
Cartridge right guide assembly to rightside plate 10
Lower frame support to rightside frame assembly 4
Lower plate to lower swingout frame assembly 1
Lower swingout frame assembly to leftside frame assembly 4
88A0233 Taptite M3x8
PANHD
Lower swingout frame assembly to leftside frame assembly (rearmost
position)
1
Upper housing 4
Screw identification table (continued)
P/N Screw type Location Qty
To Next Page
Loading...
