Repair information 4-5
7526
18B1236 Plastite panhead
M3x6
ADF open sensor to ADF 2
CCD belt to flatbed 2
Sliding rod 2
18B2302 Machine M2.6
L3-3.5
MP feeder/duplex drive motor to rightside plate 2
18B2315 Machine M3
PANHD L35
Printhead 1
27S2836 Taptite M3 L6
PANHD, black
Rear cover frame to frame 8
Right cover to printer frame 4
Rear cover to printer frame 4
27S2837 M3.5X1.34 PANHD
8L, black
Left cover to lower swingout frame 2
Top cover to left cover 1
Top cover to right cover 1
27S2838 Machine M3X0.5–
6G 6L, Black
Contacts assembly to left/front edge of printer frame 2
ISP blank plate to left plate 2
Second USB connector to left frame 1
System board USB connector to frame 1
27S2839 Taptite M3 L6
Taptite Slotted hex,
black
Rear cover frame to frame 8
Screw identification table (continued)
P/N Screw type Location Qty
To Next Page
Loading...
