Lexmark X734DE - Page 280

4-14 Service Manual
7526
Go Back
Previous
Next
Registration (black)
Top Margin
1. Reconnect the power cord to the electrical outlet, but do not turn on the printer yet.
2. Enter Diagnostic mode (press and hold 3 and 6, turn on the printer, and release the buttons when the
progress bar appears).
3. Touch REGISTRATION.
4. Touch Quick Test.
5. Beside Top Margin, use the arrows to change the values.
a. Adjust the values until both top alignment marks are on the top edge of the print.
• The right arrow increases the value and moves the top alignment marks down the page.
• The left arrow decreases the value and moves the top alignment marks up the page.
b. Touch Submit to save the value, and then touch Registration to return to the Registration menu.
6. Print the Quick Test page, and check the top alignment marks. Repeat adjustment of the top margin and
printing of the Quick Test page until top margin is set.
Registration
Bottom Margin
Left Margin
Right Margin
Skew
Top Margin
Quick Test
9
-1
0
0
-1