Lexmark X792 7562-4xx - Scanner Cable Service Check

2-150 Service Manual
7562
Go Back
Previous
Next
840.03—Scanner cable service check
Step Questions / actions Yes No
1 Remove the system board upper shield. See
“System board upper shield removal” on
page 4-30.
Check the cable for proper connection.
Remove the ADF rear cover. See “ADF rear
cover removal” on page 4-171.
Check the cable for proper connection.
Remove the scanner rear cover. See
“Scanner rear cover removal” on
page 4-215.
Check the cable for proper connection.
Are any of the cables unplugged?
Reseat the cable. Go to step 2.