4-256 Service Manual
7562
550-sheet tray right anti-tip latch assembly removal
See “Optional 550-sheet drawer assembly” on page 7-31 for the part number.
1. Remove the media tray assembly. See “550-sheet media tray assembly removal” on page 4-240.
2. Remove the top metal cover. See “550-sheet tray top metal cover removal” on page 4-257.
3. Remove the two screws (A) securing the right anti-tip latch assembly to the drawer.
Note: Hold the right anti-tip latch assembly to prevent it from falling off after removing the screws.
4. Remove the right anti-tip latch assembly.
To Next Page
Loading...
