4-168 Service Manual
7562
Waste toner full sensor removal
See “Front” on page 7-7 for the part number.
1. Remove the waste toner container. See “Waste toner container removal” on page 4-163.
2. Pry out the sensor from the front, and disconnect the cable to remove the sensor.
Waste toner tray bracket removal
See “Front” on page 7-7 for the part number.
1. Remove the lower frame cable cover. See “Lower frame cable cover removal” on page 4-20.
2. Disconnect the cable.
To Next Page
Loading...
