4-268 Service Manual
7562
2000-sheet high-capacity feeder jam clearance cover removal
See “Optional 2000-sheet high-capacity feeder” on page 7-35 for the part number.
1. Remove the media tray assembly. See “2000-sheet high-capacity feeder media tray assembly
removal” on page 4-292.
2. Remove the jam clearance top cover. See “2000-sheet high-capacity feeder rear cover removal” on
page 4-304.
3. Remove the rear cover. See “2000-sheet high-capacity feeder rear cover removal” on page 4-304.
4. Remove the left side cover. See “2000-sheet high-capacity feeder left side cover removal” on
page 4-280.
5. Remove the right side cover. See “2000-sheet high-capacity feeder right side cover removal” on
page 4-308.
6. Remove the pick assembly. See “2000-sheet high-capacity feeder pick assembly removal” on
page 4-295.
7. Remove the drive assembly. See “2000-sheet high-capacity feeder drive assembly removal” on
page 4-261.
8. Remove the LED bracket. See “2000-sheet high-capacity feeder LED bracket removal” on
page 4-277.
9. Disconnect the jam clearance cover connector (A) from the controller card assembly.
To Next Page
Loading...
