Repair information 4-193
7562
ADF platen cushion removal
See “ADF covers” on page 7-23 for the part number.
1. Lift the ADF unit assembly.
2. Unfasten the velcro to remove the cushion.
Note: If you are removing the ADF platen cushion to access another part, then place the cushion on the
scanner glass with the velcro side up to protect the glass.
Installation note: Lay the ADF platen cushion on the scanner glass with the velcro side up, and then close the
ADF unit assembly.
To Next Page
Loading...
