4-98 Service Manual
7562
MPF paper pick assembly removal (including the MPF ratchet collar and MPF drive
pulley)
See “Left and rear covers” on page 7-5 for the part numbers.
1. Remove the left cover. See “Left cover removal” on page 4-16.
2. Remove the waste toner left cover. See “Waste toner left cover removal” on page 4-31.
3. Carefully pull the MPF drive belt from the MPF drive pulley.
4. Remove the E-clip (A), and then remove the pulley (B).
To Next Page
Loading...
