Lexmark X792 7562-4xx - Printer Configurations

1-2 Service Manual
7562
Go Back
Previous
Next
Printer configurations
Some options may not be available for all models.
1 Automatic Document Feeder (ADF)
2 ADF input tray
2 Paper bail
3 Operator panel
4 Standard output bin
5 Front access door
6 Standard 550-sheet tray
7 Multipurpose feeder
8 Left access door
9 Tray paper jam access door
10 Optional 2000-sheet high-capacity feeder*
11 Optional 550-sheet tray*
12 Caster base
*
The printer supports up to four 550-sheet trays,
or one 2000-sheet tray with up to two 550-sheet
trays.
CAUTION—TIPPING HAZARD
Floor-mounted configurations require additional furniture for stability. You must use either a
printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an
input option, or more than one input option. If you purchased a multifunction printer (MFP) that
scans, copies, and faxes, you may need additional furniture. For more information, see
www.lexmark.com/multifunctionprinters.
1
2
5
6
7
3
4
8
10
9
9
11
12