Lexmark X792 7562-4xx - Staging Paper Path Reference Edge Assembly Removal

4-140 Service Manual
7562
Go Back
Previous
Next
Staging paper path reference edge assembly removal
See “Front” on page 7-7 for the part number.
1. Remove the rear cover. See “Rear cover removal” on page 4-23.
2. Remove the left cover. See “Left cover removal” on page 4-16.
3. Remove the fuser. See “Fuser assembly removal” on page 4-60.
4. Remove the ITU assembly. See “ITU assembly removal” on page 4-72.
5. Remove the standard media tray. See “Standard media tray removal” on page 4-149.
6. Lower the pick arm all the way.
7.
8.
Push the top of the deflector assembly down and rotate it back to release the upper hooks.
1
1
2