Repair information 4-259
7562
2000-sheet high-capacity feeder bellcrank assembly removal
See “Optional 2000-sheet high-capacity feeder” on page 7-35 for the part number.
1. Remove the media tray assembly. See “2000-sheet high-capacity feeder media tray assembly
removal” on page 4-292.
2. Remove the recoil spring from the bellcrank.
3. Remove the E-clip (A) securing the bellcrank to the frame.
4. Remove the bellcrank.
5. Repeat steps 2-4 to remove the bellcrank on the other side.
This is the photo of the 2000-sheet high-capacity feeder bellcrank assembly.
To Next Page
Loading...
