Lexmark X792 7562-4xx - Paper Path Redrive Assembly with Sensors Removal

4-116 Service Manual
7562
Go Back
Previous
Next
Paper path redrive assembly with sensors removal
See “Left” on page 7-11 for the part number.
1. Remove the AIO front lower cover. See “AIO front lower cover removal” on page 4-3.
2. Remove the main fan. See “Main fan removal” on page 4-88.
3. Remove the fuser. See “Fuser assembly removal” on page 4-60.
4. Disconnect the sensor cables (A).
5. Clip the cable tie, and route the cables through the frame.
A