Lexmark X792 7562-4xx - Cartridge Blower Assembly Removal

Repair information 4-35
7562
Go Back
Previous
Next
4. Disconnect the cable, and then press in the tabs to remove the sensor from the bracket.
Cartridge blower assembly removal
See “Front” on page 7-7 for the part number.
1. Remove the right cover. See “Right cover removal” on page 4-26.
2. Remove the front access door. See “Front access door assembly removal” on page 4-9.
3. Remove the screw (A) in the top cover.
A (88A0323)