Lexmark X792 7562-4xx - Right Cover Removal

4-26 Service Manual
7562
Go Back
Previous
Next
2. Pull the left side out, and then remove the system board shield door to remove the rear upper cover.
Right cover removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the rear cover. See “Rear cover removal” on page 4-23.
2. Remove the AIO option cover. See “AIO option cover removal” on page 4-4.
Note: If you have any output options installed, then the top cap cover is already removed. Remove the
output options and HTU redrive unit instead.
3. Remove the standard media tray. See “Standard media tray removal” on page 4-149.
4. Open the front access door, and remove the black and magenta cartridges.
5. Remove the screw (A).
1
2
A (88A0323)