Lexmark X792 7562-4xx - Scanner Rear Cover Removal; Scanner Right Side Cover Removal

Repair information 4-215
7562
Go Back
Previous
Next
Scanner rear cover removal
See “Rear” on page 7-15 for the part number.
1. Remove the rear upper cover. See “Rear upper cover removal” on page 4-25.
2. Remove the four screws (A) and the one screw (B), and rotate the bottom up to remove the cover.
Scanner right side cover removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the scanner rear cover. See “Scanner rear cover removal” on page 4-215.
2. Remove the screw from the side (A) and the screw from the rear (B).
3. Slide the cover toward the rear of the printer and pull to remove it.
A (88A0232)
B (88A0323)
A (88A0232) B (88A0323)