Lexmark X792 7562-4xx - HTU Right Inner Cover Removal

4-398 Service Manual
7562
Go Back
Previous
Next
HTU right inner cover removal
1. Remove all output option from the printer.
2. Remove the output bin. See “HTU output bin removal” on page 4-383.
3. Remove the front standard bin cover. See “HTU front standard bin cover removal” on page 4-374.
4. Remove the two screws (A), one screw (B) and disconnect the cable (C).
5. Remove the HTU drive belt. See “HTU drive belt removal” on page 4-370.
6. Remove the two screws (D), one screw (E) and disconnect the cable (F).