EasyManua.ls Logo

Lexmark X945 - Page 139

Lexmark X945
815 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diagnostic information 2-25
7510
847.01
Service fax
Fax storage The remaining memory available on the hard drive
is too small.
Go to “847.01 Fax storage error” on page 2-130.
848.00
Service modem
Fax modem/configuration ID
mismatch
The device does not have a modem installed, even
though its configuration ID indicates that a modem
should be present.
Go to “848.00 Fax/modem configuration ID
mismatch” on page 2-131.
849.00
Service hard
drive
Hard drive/configuration ID
mismatch
The device does not have a hard drive installed,
even though its configuration ID indicates that a
hard drive should be present.
Go to “849.00 Hard drive/configuration ID
mismatch” on page 2-131.
900.xx
Service RIP
software
RIP card assembly software
error
A error has occurred in the RIP card assembly
software.
Go to “900.XX RIP card assembly software error”
on page 2-131.
901.xx
Service engine
error
RIP card assembly software
error
A error has occurred in the RIP card assembly
software.
Go to “900.XX RIP card assembly software error”
on page 2-131.
902.00
Service engine
error
General upper engine card
error
Fuse #1
An error has occurred in the upper engine card
assembly.
Go to “902.00 General upper engine error fuse
#1” on page 2-132.
902.01
Service engine
error
General upper engine card
error
Fuse #2
An error has occurred in the upper engine card
assembly.
Go to “902.01 General upper engine error fuse
#2” on page 2-134.
902.02
Service engine
error
General upper engine card
error
Fuse #3
An error has occurred in the upper engine card
assembly.
Go to “902.02 General upper engine error fuse
#3” on page 2-134.
902.03
Service engine
error
General lower engine card
error
Fuse #1
An error has occurred in the lower engine card
assembly.
Go to “902.03 General lower engine error fuse
#1” on page 2-135.
902.04
Service engine
error
General lower engine card
error
Fuse #2
An error has occurred in the lower engine card
assembly.
Go to “902.04 General lower engine error fuse
#2” on page 2-136.
902.05
Service engine
error
General lower engine card
error
Fuse #3
An error has occurred in the lower engine card
assembly.
Go to “902.05 General lower engine error fuse
#3” on page 2-136.
902.06
Service engine
error
General lower engine card
error
Fuse #4
An error has occurred in the lower engine card
assembly.
Go to “902.06 General lower engine error fuse
#4” on page 2-137.
Error code or
message
Error contents Description/Action

Table of Contents

Other manuals for Lexmark X945

Related product manuals