Lexmark X945 - 2000-Sheet Dual Input (TTM)-Tray Support Roll Removal

4-168 Service Manual
7510
7. Remove the caster (A).
2000-sheet dual input (TTM)—tray support roll removal
1. Remove the tray module left cover. See “2000-sheet dual input (TTM)– tray module left cover removal” on
page 4-167.
2. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)–TTM media tray 3 assembly
removal” on page 4-171.
3. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)–TTM media tray 4 assembly removal” on
page 4-170.
4. Remove the foot cover. See “2000-sheet dual input (TTM)–foot cover removal” on page 4-165.
5. Remove the two screws securing the two brackets (A).
6. Remove the two E-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
7. Remove the two E-clips securing the tray support rolls (B) to the main frame (C).
Front
B
D
A
E-clip