Lexmark X945 - 500-Sheet Drawer (3 TM)-Media Feed Lift Motor Removal

Repair information 4-217
7510
7. Remove the sensor (tray 3 feed-out) (B).
3X 500-sheet drawer (3TM)—media feed lift motor removal
1. Remove the media feed unit assembly. See“3X 500-sheet drawer (3TM)–media feed unit assembly removal
(tray 2)” on page 4-215 or “3X 500-sheet drawer (3TM)–media feed unit assembly removal (tray 3)” on
page 4-213.
2. Disconnect the harness from the media feed lift motor (A).
3. Remove the two screws securing the media feed lift motor to the media feed unit assembly (B).
4. Remove the media feed lift motor (B).
A
B
Connector
Rear