Lexmark X945 - Printer Setup; Defaults; Printed Color Page Count

3-18 Service Manual
7510
PRINTER SETUP
To enter the PRINTER SETUP screen, touch PRINTER SETUP from the Diagnostics Menu. The following
graphic appears on the LCD:
Defaults
The value of this setting determines whether the printer uses the US or Non-US factory default value for the
printer settings listed below:
Touch Submit to change the value of this setting, then the LCD returns to the Diagnostics menu. To return to the
PRINTER SETUP menu without changing the value of this setting, touch Back.
Printed Color Page Count
The value of this setting enables you to gauge the amount of usage on a device.
The Printed Page Count cannot be reset by the servicer.
Printer Setting US Value Non-US Value
Paper Sizes
(applies only to input sources which do not have hardware size
sensing capability)
Letter A4
Envelope Size
(applies only to envelope feeding sources which do not have
hardware size sensing capability)
10 Envelope DL Envelope
PCL Symbol Set PC-8 PC-850
PPDS Code Page 437 850
Universal Units of Measure Inches Millimeters
?
Back
Submit
PRINTER SETUP
Defaults
Serial Number
Envelope Entrance
Engine Setting 1
NV26T470
0
Medium
U.S.
Printed Page Count
Perm Page Count
24
0